华为[ENSP]删除配置错误端口trunk口

ensp删除错误trunk端口

ensp实验中端口配置错误(应配置access端口,错误配置成trunk端口)

//配置如下
[s3-gigabitethernet0/0/3]]interface gigabitethernet 0/0/1
[s3-gigabitethernet0/0/1]port link-type trunk 
[s3-gigabitethernet0/0/1]port trunk allow-pass vlan 5 12 1002

//正确删除方法如下 
[s3-gigabitethernet0/0/1]undo port trunk allow-pass vlan all
//查看接口配置
[s3-gigabitethernet0/0/1]dis this       
#
interface gigabitethernet0/0/1
 port link-type trunk
 //如果包含下面这一条信息
 undo port trunk allow-pass vlan 1      
#
//则执行
port trunk allow-pass vlan 1
//若没有就不用
//最后
undo port link-type